广州国检中心(运输鉴定、危险特性分类鉴定)部门
主营产品: MSDS ,海运运输鉴定、空运运鉴定、危险特性分类鉴别
TSCA申请流程是什么 TSCA报告办理需要怎么做

TSCA申请流程是什么 TSCA报告办理需要怎么做


TSCA名录为一动态名录,现有85,000多种化学物质。已列入TSCA名录的物质为“现有物质”,未列入的则为“新物质”。在美国的现有物质和新物质生产商和进口商,均须履行相应的法规义务。

对于新物质,生产商或进口商须进行PMN(预生产)申报。

对于现有物质,生产商或进口商须确认该物质与相应的用途是否符合重要新用途规则(SNUR)和化学品数据报告(CDR)要求。

属于TSCA监管或豁免范围的产品,必须提供TSCA符合或豁免声明。

§770.17 No-added formaldehyde-based resins.
无添加甲醛树脂
(a) Producers of composite wood product panels made with no-added formaldehyde-based resins may apply to an EPA TSCA Title VI TPC or to CARB for a two-year exemption from the testing requirements in §770.20 and certification requirements in §§770.15 and 770.40(b). The application must contain the following:

(a)使用未添加的甲醛基树脂制成的复合木制品板的生产商可以申请EPA TSCA Title VI TPC或CARB对§770.20中的测试要求和§§770.15和770.40(b)中的认证要求进行为期两年的免除。该申请程序必须包含以下内容:

(1) The panel producer's name, address, and telephone number;

(1)面板生厂商的姓名,地址和电话号码;

(2) An identification of the specific product and the resin system;

(2)特定产品和树脂系统的识别;

(3) At least one test conducted under the supervision of an EPA TSCA Title VI TPC pursuant to test method ASTM E1333-14 or ASTM D6007-14 (incorporated by reference, see §770.99). Test results obtained by ASTM D6007-14 must include a showing of equivalence in accordance with §770.20(d)(1); and

(3)根据测试方法ASTM E1333-14或ASTM D6007-14(通过引用并入,参见§770.99),在EPA TSCA Title VI TPC的监督下进行至少一次测试。 ASTM D6007-14获得的测试结果必须包括符合§770.20(d)(1)的等效性;和

(4) Three months of routine quality control tests under §770.20, including a showing of correlation in accordance with §770.20(d)(2), totaling not less than five quality control tests.

(4)根据§770.20进行的三个月的常规质量控制测试,包括根据§770.20(d)(2)显示的相关性,总共不少于五个质量控制测试。

(b) The EPA TSCA Title VI TPC will approve a panel producer's application within 90 calendar days of receipt if the application is complete and demonstrates that the candidate product achieves the emission standards described in paragraph (c) of this section.

(b)如果申请完成并且证明候选产品达到本节(c)段所述的排放标准,EPA TSCA Title VI TPC将在收到后90个日历日内批准面板生产商的申请。

(c) As measured according to paragraphs (a)(3) and (4) of this section, the emission standards for composite wood products made with no-added formaldehyde-based resins are as follows:

(c)根据本节(a)(3)和(4)的规定,用不添加甲醛树脂制成的复合木制品的排放标准如下:

(1) No test result higher than 0.05 parts per million (ppm) of formaldehyde for hardwood plywood and 0.06 ppm for particleboard, medium-density fiberboard, and thin medium-density fiberboard.

(1)对于硬木胶合板,不能高于0.05份百万分率(ppm)的测试结果,对于刨花板,中密度纤维板和薄中密度纤维板,不能高于0.06ppm的测试结果。

(2) No higher than 0.04 ppm of formaldehyde for 90% of the three months of routine quality control testing data required under paragraph (a)(4) of this section.

(2)本节(a)(4)所要求的三个月常规质量控制测试数据的90%中,甲醛含量不得高于0.04 ppm。

(d) Products that meet the requirements specified under §770.17(c)(1) and (2) and have obtained exemption from the California Air Resources Board will also be exempt from the requirements in §§770.15, 770.20, and 770.40(b), as long as the requirements of the California Air Resources Board remain as stringent as EPA's requirements.

(d)符合§770.17(c)(1)和(2)规定的要求且已获得加州空气资源委员会豁免的产品也将免于§§770.15,770.20和770.40(b)的要求 ,只要加州空气资源委员会的要求仍然与EPA的要求一样严格。

展开全文
相关产品
拨打电话 微信咨询 发送询价